"TERMS AND CONDITIONS OF SALES AND GENERAL INFORMATION"

GENERAL INFORMATION

This catalogue introduces the Vega series and replaces previously published information.

SPECIFICATIONS
Vega's constant improvement of its products, is based on improved design and development. Whilst great care is taken to give the most current information in this publication, we reserve the right to amend and modify the characteristics of our products without prior notice. All specifications and illustrations in this publication shall not form part of any contract.

DIMENSIONS
All the products dimensions are specified in millimeters unless otherwise stated. These dimensions are subject to change without notification in view of our constant effort at product improvement.

TRANSFORMER & CONTROL GEAR
All luminaires supplied are for use with transformers and control gear for 230V 50Hz unless otherwise requested at the time of ordering. The transformer requires installation as close to the fixtures as possible to avoid voltage drop usually with a wire length of less than 2m otherwise a significant voltage drop is encountered . Dimming the current in low voltage installation is only possible by means of a dimmer suitable for the kind of transformer used. Conventional magnetical transformers require a dimmer for inductive loads. Electronic transformers on the other hand normally require a dimmer for capacitive loads. The dimmer should never be loaded under the minimum power nor be overloaded and the instructions which come with the dimmer must be carefully read and strictly followed.

LAMP
Wattage and type of lamps are shown for each fitting. Lower wattages may used if the lamp dimensions are the same. All luminaires are supplied without lamps. Incorrect lamp used may affect efficiency, change the planned distribution and create glare and also cause overheating.

INSTALLATION
All luminaires are to be installed in accordance with IEC regulations and local authority requirements. The local authority should be consulted if further information is required. All personnel involved in the installation, handling, use and disposal of these products must be fully aware of the precautions that need to be taken as the responsibility for correct installation lies with the user. Installation of these luminaires should only be carried out by competent personnel.

FINISHES
The standard finishes of our luminaires are specified in the luminaire descripti on. The luminaires can also be finished in other colours and the prices and delivery for these other finishes are available on request.

TRADE MARKS AND PATENT
Many of our products are the subject of industrial design patent application or registration.

WARRANTY
Our product is guaranteed against manufacturing defect. The warranty is limited only to the replacement of the luminaire to be supplied ex-factory or warehouse. Validity period : 12 months from date of delivery.

next >> TOP back to top
MENU
PROFILE
PRODUCTS
ENQUIRY
CONTACT
TERMS
Designed by WebWork-Solutions @ Copyrights